LAN Cat7a 1000MHz Dual

Benefits

• LAN cables for structured building cabling according to EN 50173 and ISO/IEC 11801

Application range

• Areas where the end device density is very high
• For office wiring, administration and development buildings in the tertiary sector (floor wiring).
• Cable length in tertiary area (horizontal area, floor) should not exceed a length of 100 m in accordance with the ISO/IEC 11801 and EN 50173 standards (90 m in cable duct + 10 m in working area)

Product features

• Transfer of digital and analogue data signals
• IEEE 802.3: 10/100/1000Base-T, 10GBase-T IEEE 802.5: ISDN; FDDI; ATM; cable sharing IEEE 802.3at: suitable for PoE, VoIP
• Flame-retardant according IEC 60332-1-2
• No flame-propagation according to IEC 60332-3-25 (Flame spread on vertical cable or wire bundle)

Norm references / Approvals

• LAN Cat.7A cables from Lapp Kabel for "Structured Cabling Systems” meet the requirements in accordance with EIA/TIA-568 and TSB36 as well as ISO/IEC 11801 or EN 50173 (Class FA - permanent link).

Product Make-up

• Solid conductor 4x2xAWG23/1,
  duplex 2x(4x2xAWG23/1)
• Core insulation: PE
• S/FTP: copper braid as overall screening and pair screening with aluminium compound foil
• Outer sheath: halogen-free, flame-retardant compound
• Colour: yellow (RAL 1021)

Characteristic impedance

• 100 Ω ± 15%

Temperature range

• Fixed installation: -20°C to +60°C
• During installation: 0 °C to +50 °C