LAN Cat7a 1600MHz

Benefits

• LAN cables for structured building cabling according to EN 50173 and ISO/IEC 11801

Application range

• Mainly used where the terminal density is very high, e.g. for wiring office, administration and development buildings in the tertiary area (floor wiring).
• 1500 MHz: Cable length in tertiary area (horizontal area, floor) should not exceed a length of 100 m in accordance with the ISO/IEC 11801 and EN 50173 standards (90 m in cable duct + 10 m in working area)
• 1600 MHz: at max. 30m length (typical in data centers)

Product features

• Transfer of digital and analogue data signals
• IEEE 802.3: 10/100/1000Base-T, 10GBase-T IEEE 802.5: ISDN; FDDI; ATM; cable sharing IEEE 802.3at: suitable for PoE, VoIP
• Flame-retardant according IEC 60332-1-2
• No flame-propagation according to IEC 60332-3-25 (Flame spread on vertical cable or wire bundle)

Norm references / Approvals

• LAN Cat.7A cables from Lapp Kabel for "Structured Cabling Systems” meet the requirements in accordance with EIA/TIA-568 and TSB36 as well as ISO/IEC 11801 or EN 50173 (Class FA - permanent link).
• Exceeds the requirements of EN 50173 and ISO/IEC 11801 standards

Product Make-up

• Solid conductor 4x2xAWG22/1
• Core insulation: cellular polyolefin
• S/FTP: copper braid as overall screening and pair screening with aluminium compound foil
• Outer sheath: halogen-free, flame-retardant compound
• Colour: yellow (RAL 1021)

Characteristic impedance

• 100 Ω ± 15%

Temperature range

• Fixed installation: -20°C to +60°C
• During installation: 0 °C to +50 °C