Black Spiral PUR 4G1.5/500

Benefits

• Good cost-benefit ratio
• Increased durability under harsh conditions thanks to robust PUR outer sheath
• Resistant to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical media
• Wide application range

Application range

• Construction of engines and appliances with flexible power connections as well as at dockyards
• Construction of machinery and powered doors
• Measurement and control technology
• Any commercial/industrial/agricultural facility: connection of tools, appliances and mobile motors
• For indoor and outdoor use

Product features

• Black, robust outer PUR sheath
• High tensile strength and abrasion-resistance
• High restoring forces
• High resistance to oil, low temperatures, microbes and hydrolysis

Norm references / Approvals

• Based on EN 50525-2-21 H07BQ-F
• The spiralling modifies the properties of the <HAR> certified H07BQ-F cable (sold by the metre) that certain technical requirements stipulated by the H07BQ-F standards are no longer complied with following spiralling. As a result, the <HAR> H07BQ-F design certification of the H07BQ-F cable, also identifiable on the spiral cable, is no longer valid in conjunction with the spiralled piece good design of the "SPIRAL H07BQ-F BLACK”. This is a completely logical consequence of the spiralling processing steps.

Product Make-up

• Tinned stranded copper wire of braided conductor class 5 according to IEC 60228/VDE 0295
• Core insulation: EI6 rubber according to EN 50525-1 & EN 50363-1/ VDE 0207-363-1; coloured according to HD 308/VDE 0293-308; VDE and HAR marking of the unspiralled H07BQ-F (sold by the metre) as the basic material for the spiralling
• Use of talcum
• Black, outer PUR sheath made of TMPU according to EN 50525-2-21; marking "H07BQ-F ..."
• For the 4 standard solid lengths available, please see the article table below
• Radial outflow shape at cable ends - length of ends: 200 mm at the first end/600 mm at the other end
• Versions with other solid lengths, end lengths and end forms available on request