PreviousNBB15-U4-E2-V1

NextNBB20-U1-A2

NBB15-U4-Z2

VariKont ®, PA/metal with epoxy coating, Type: 2-wire, flush, DC, screw terminals, IP68 / IP69K

Free shipping on Web orders over $100

$294.00

(Each excl GST)

On Request

Quantity Breaks

25+

$294.00

SKU: PF-203032 Manufacturer part number: 203032

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NBB15-U4-Z2

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Actual operating distance		13.5 ... 16.5 mm typ. 15 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.7
Output type		2-wire
Nominal ratings
Operating voltage		5 ... 60 V
Switching frequency		0 ... 400 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Short-circuit protection		yes
Voltage drop		≤ 5 V
Voltage drop at I_L
	Voltage drop I_L = 100mA, switching element on	... 5 V
Operating current		2 ... 200 mA
Off-state current		0 ... 0.5 mA
Switching state indicator		2 LED, yellow
Functional safety related parameters
MTTF_d		1133 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA/metal with epoxy powder coating
Sensing face		PA
Housing base		metal
Degree of protection		IP68 / IP69K
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing)

SKU

PF-203032

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	15mm
Output	DC NO or NC

Your name *

Your email *

Enquiry *

Product Files

Type Name File Name / Description

Datasheet

203032_eng

Technical data of NBB15-U4-Z2

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Actual operating distance		13.5 ... 16.5 mm typ. 15 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.7
Output type		2-wire
Nominal ratings
Operating voltage		5 ... 60 V
Switching frequency		0 ... 400 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Short-circuit protection		yes
Voltage drop		≤ 5 V
Voltage drop at I_L
	Voltage drop I_L = 100mA, switching element on	... 5 V
Operating current		2 ... 200 mA
Off-state current		0 ... 0.5 mA
Switching state indicator		2 LED, yellow
Functional safety related parameters
MTTF_d		1133 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA/metal with epoxy powder coating
Sensing face		PA
Housing base		metal
Degree of protection		IP68 / IP69K
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing)

SKU

PF-203032

Products specifications

Attribute name	Attribute value
Operating Distance	15mm
Output	DC NO or NC