NBB30-U1K-E2

Name: NBB30-U1K-E2
SKU: PF-316607-0001
Price: 433.00 NZD
Availability: InStock

VariKont ®, PA, Type: 3-wire, Installation: flush, Voltage: DC, screw terminals, IP68 / IP69

$433.00 (Each excl GST)

(Each excl GST)

Global Stock

SKU: PF-316607-0001 Manufacturer part number: 316607-0001 Price breaks available:

Select or Type Quantity

SKU: PF-316607-0001 Manufacturer part number: 316607-0001 Price breaks available:

Free shipping on Web orders over $100

Overview
Specifications
Downloads
Ask A Specialist

Technical data of NBB30-U1K-E2

General specifications
Switching function		Normally open (NO)
Output type		PNP
Rated operating distance		30 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 24.3 mm
Actual operating distance		27 ... 33 mm typ.
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.37
Reduction factor r₃₀₄		0.76
Reduction factor r_Brass		0.46
Output type		3-wire
Nominal ratings
Operating voltage		10 ... 30 V DC
Switching frequency		0 ... 60 Hz
Hysteresis		typ. 2 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 2 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA
No-load supply current		≤ 20 mA
Time delay before availability		80 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		899 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA
Sensing face		PA
Housing base		plastic
Degree of protection		IP68 / IP69
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing)

SKU

PF-316607-0001

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	30mm
Output	PNP NO

Product Files

Type Name

Datasheet

316607-0001_eng

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Technical data of NBB30-U1K-E2

General specifications
Switching function		Normally open (NO)
Output type		PNP
Rated operating distance		30 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 24.3 mm
Actual operating distance		27 ... 33 mm typ.
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.37
Reduction factor r₃₀₄		0.76
Reduction factor r_Brass		0.46
Output type		3-wire
Nominal ratings
Operating voltage		10 ... 30 V DC
Switching frequency		0 ... 60 Hz
Hysteresis		typ. 2 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 2 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA
No-load supply current		≤ 20 mA
Time delay before availability		80 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		899 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA
Sensing face		PA
Housing base		plastic
Degree of protection		IP68 / IP69
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing)