PreviousNCN25-F35-A2-250-V1

NextNCN25-F35-A2-250-V1

NCN20-F35-A2-250-20M-V1

Rectangular type, PTFE / Al / 303, Type: 4-wire, Installation: flush mountable, Voltage: DC, M12 , 4-pin

Free shipping on Web orders over $100

$2841.00

(Each excl GST)

Global Stock

Quantity Breaks

25+

$2,841.00

SKU: PF-187524 Manufacturer part number: 187524

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NCN20-F35-A2-250-20M-V1

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		20 mm
Installation		flush mountable
Output polarity		DC
Assured operating distance		0 ... 16.2 mm
Reduction factor r_Al		0.5
Reduction factor r_Cu		0.5
Reduction factor r₃₀₄		0.6 ... 1
Output type		4-wire
Mounting angle		Al
Amplifier housing		Stainless steel
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 20 Hz
Hysteresis		0.3 ... 5 typ. 2 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
No-load supply current		≤ 25 mA
Time delay before availability		≤ 20 ms
Switching state indicator		Multihole-LED, yellow
Functional safety related parameters
MTTF_d		7515 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		0 ... 250 °C (32 ... 482 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin
Cable version		PFA cable, with armour of stainless steel
Core cross-section		3 x 0.34 , screened
Housing material		PTFE / Al / 1.4305 / AISI 303
Sensing face		PTFE
Degree of protection		amplifier IP67 sensor IP40
Cable length		L = 20 m
Note		- amplifier 0 °C ... 70 °C - r_1.4305 dep. on thickness of measurement plate d: r_1.4305 = 1 for d < 1mm Additional accessory: Protective cover SH-F35 is available for use in areas where there is moisture and as a means of mechanical protection.

SKU

PF-187524

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	20mm
Output	PNP NO/NC

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product Files

Type Name

Datasheet

187524_eng

Technical data of NCN20-F35-A2-250-20M-V1

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		20 mm
Installation		flush mountable
Output polarity		DC
Assured operating distance		0 ... 16.2 mm
Reduction factor r_Al		0.5
Reduction factor r_Cu		0.5
Reduction factor r₃₀₄		0.6 ... 1
Output type		4-wire
Mounting angle		Al
Amplifier housing		Stainless steel
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 20 Hz
Hysteresis		0.3 ... 5 typ. 2 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
No-load supply current		≤ 25 mA
Time delay before availability		≤ 20 ms
Switching state indicator		Multihole-LED, yellow
Functional safety related parameters
MTTF_d		7515 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		0 ... 250 °C (32 ... 482 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin
Cable version		PFA cable, with armour of stainless steel
Core cross-section		3 x 0.34 , screened
Housing material		PTFE / Al / 1.4305 / AISI 303
Sensing face		PTFE
Degree of protection		amplifier IP67 sensor IP40
Cable length		L = 20 m
Note		- amplifier 0 °C ... 70 °C - r_1.4305 dep. on thickness of measurement plate d: r_1.4305 = 1 for d < 1mm Additional accessory: Protective cover SH-F35 is available for use in areas where there is moisture and as a means of mechanical protection.

SKU

PF-187524

Products specifications

Attribute name	Attribute value
Operating Distance	20mm
Output	PNP NO/NC