NRN75-FP-A2-P3

Name: NRN75-FP-A2-P3
SKU: PF-242779
Price: 893.00 NZD
Availability: InStock

Rectangular type, PBT, Type: 4-wire, Installation: non-flush, Voltage: DC, screw terminals, IP68

$893.00 (Each excl GST)

(Each excl GST)

On Request

SKU: PF-242779 Manufacturer part number: 242779 Price breaks available:

Select or Type Quantity

SKU: PF-242779 Manufacturer part number: 242779 Price breaks available:

Free shipping on Web orders over $100

Overview
Specifications
Downloads
Ask A Specialist

Technical data of NRN75-FP-A2-P3

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		75 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		0 ... 55 mm
Reduction factor r_Al		1
Reduction factor r_Cu		1
Reduction factor r₃₀₄		1
Reduction factor r_St37		1
Nominal ratings
Operating voltage		10 ... 30 V DC
Switching frequency		0 ... 50 Hz
Hysteresis		typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Rated insulation voltage		50 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA
No-load supply current		≤ 20 mA
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		824 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		0 ... 50 °C (32 ... 122 °F) (± 10 % changing operating distance) -25 ... 70 °C (-13 ... 158 °F) (± 20 % changing operating distance)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Degree of protection		IP68

SKU

PF-242779

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	75mm
Output	PNP NO/NC

Product Files

Type Name

Datasheet

242779_eng

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Technical data of NRN75-FP-A2-P3

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		75 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		0 ... 55 mm
Reduction factor r_Al		1
Reduction factor r_Cu		1
Reduction factor r₃₀₄		1
Reduction factor r_St37		1
Nominal ratings
Operating voltage		10 ... 30 V DC
Switching frequency		0 ... 50 Hz
Hysteresis		typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Rated insulation voltage		50 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA
No-load supply current		≤ 20 mA
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		824 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		0 ... 50 °C (32 ... 122 °F) (± 10 % changing operating distance) -25 ... 70 °C (-13 ... 158 °F) (± 20 % changing operating distance)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Degree of protection		IP68