PreviousRelay Module - 24…230V AC/D...

NextRelay Module - 24V DC 8A 2C...

Relay Module - 24V DC 5A 4CO contacts

WAGO Relay socket with red status indicator 5A 4CO contacts 24VDC; 31 mm; 1,50 mm²; Grey

Free shipping on Web orders over $100

$36.60

(Each excl GST)

On Request

Quantity Breaks

25+

500+

$36.60

SKU: WAGO-858-304 Manufacturer part number: 858-304 Manufacturer: WAGO

Qty:

Overview
Contact Us
Downloads

Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²

Control Circuit
Nominal input voltage UN	DC 24 V
Input voltage range	-20 … +10 %
Nominal input current at UN	37 mA

Load circuit
Number of changeover/switchover contacts	4
Contact material (relay)	AgCe
Limiting continuous current	5 A
Inrush current (resistive) max.	(AC) 15 A / 4 s
Switching voltage (max.)	AC 250 V
Switching power (resistive) max.	AC 1250 VA; DC (see load limit curve)
Switching capacity	AC-15: 1 A / AC 240 V; DC-13: 2 A / DC 24 V
Recommended minimum load	12 V / 100 mA
Pull-in time (typ.)	25ms
Drop-out time (typ.)	25ms
Bounce time (typ.)	4ms
Electrical life (NO; resistive load; 23 °C)	100 x 10³ switching operations
Mechanical life	20 x 10⁶ switching operations

Signaling
Status indicator	Red LED
	Mechanical
Safety and protection
Rated voltage	300V
Rated surge voltage	2.5kV
Overvoltage category	II
Pollution degree	2
Dielectric strength (control/load circuit) (AC, 1 min)	1.5 kVrms
Dielectric strength (open contact) (AC, 1 min)	1 kVrms
Dielectric strength (load/load circuit) (AC, 1 min)	1.5 kVrms
Insulation type (control/load circuit)	Basic insulation
Insulation type (open contact)	Functional insulation
Insulation type (load/load circuit)	Basic insulation
Insulation type (adjacent devices)	Reinforced insulation (safe isolation)
Protection type	IP20

Connection data
Connection technology	Push-in CAGE CLAMP®
Solid conductor	0.34 … 1.5 mm² / 22 … 16 AWG
Fine-stranded conductor	0.34 … 1.5 mm² / 22 … 16 AWG
Strip length	9 … 10 mm / 0.35 … 0.39 inches
Note (conductor cross-section)	2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG

Physical data
Width	31 mm / 1.22 inches
Height	97 mm / 3.819 inches
Depth from upper-edge of DIN-rail	73 mm / 2.874 inches

Mechanical data
Mounting type	DIN-35 rail
Mounting position	horizontal (standing/lying); vertical

SKU WAGO-858-304

GTIN 4055143567770

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product Files

Type Name

Data Sheet

WAGO-858-304

Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²

Control Circuit
Nominal input voltage UN	DC 24 V
Input voltage range	-20 … +10 %
Nominal input current at UN	37 mA

Load circuit
Number of changeover/switchover contacts	4
Contact material (relay)	AgCe
Limiting continuous current	5 A
Inrush current (resistive) max.	(AC) 15 A / 4 s
Switching voltage (max.)	AC 250 V
Switching power (resistive) max.	AC 1250 VA; DC (see load limit curve)
Switching capacity	AC-15: 1 A / AC 240 V; DC-13: 2 A / DC 24 V
Recommended minimum load	12 V / 100 mA
Pull-in time (typ.)	25ms
Drop-out time (typ.)	25ms
Bounce time (typ.)	4ms
Electrical life (NO; resistive load; 23 °C)	100 x 10³ switching operations
Mechanical life	20 x 10⁶ switching operations

Signaling
Status indicator	Red LED
	Mechanical
Safety and protection
Rated voltage	300V
Rated surge voltage	2.5kV
Overvoltage category	II
Pollution degree	2
Dielectric strength (control/load circuit) (AC, 1 min)	1.5 kVrms
Dielectric strength (open contact) (AC, 1 min)	1 kVrms
Dielectric strength (load/load circuit) (AC, 1 min)	1.5 kVrms
Insulation type (control/load circuit)	Basic insulation
Insulation type (open contact)	Functional insulation
Insulation type (load/load circuit)	Basic insulation
Insulation type (adjacent devices)	Reinforced insulation (safe isolation)
Protection type	IP20

Connection data
Connection technology	Push-in CAGE CLAMP®
Solid conductor	0.34 … 1.5 mm² / 22 … 16 AWG
Fine-stranded conductor	0.34 … 1.5 mm² / 22 … 16 AWG
Strip length	9 … 10 mm / 0.35 … 0.39 inches
Note (conductor cross-section)	2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG

Physical data
Width	31 mm / 1.22 inches
Height	97 mm / 3.819 inches
Depth from upper-edge of DIN-rail	73 mm / 2.874 inches

Mechanical data
Mounting type	DIN-35 rail
Mounting position	horizontal (standing/lying); vertical

SKU WAGO-858-304

GTIN 4055143567770