UL Screened 7G1.5

Benefits

• High electrical performance due to 4 kV test voltage
• Multifunctional application possibilities

Application range

• Plant engineering 
  Industrial machinery 
  Heating and air-conditioning systems
• In EMC-sensitive environments
  (electromagnetic compatibility)
• Mainly used in dry, damp and wet interiors (including water-oil mixtures), but not for outdoor use
• For fixed installation under medium mechanical load conditions, and applications with occasional flexing at free, non-continuously recurring movement without tensile load or compulsory guidance
• Note: for the use of AWM (Appliance Wiring Material) cables in industrial machinery (USA) according to NFPA 79 Ed. 2015: please see the catalogue appendix table T29

Product features

• Flame-retardant according to IEC 60332-1-2 
  and UL 1581 §1061 Cable Flame Test
• Oil-resistant according to EN 50363-4-1: TM5
• High degree of screening
  low transfer impedance 
  (max. 250 Ω/km at 30 MHz)

Norm references / Approvals

• UL AWM Style 21098 
  CSA AWM I A/B II A/B
• Multi-standard cables have conductor strands with nominal sizes in mm² or AWG/kcmil. The master size is mentioned in the table below, while the equivalent size of the other system can be found in the Appendix T16 of this catalogue. For this related secondary size the cross-section of the conductor mostly works out to be greater than the
  specified nominal value.

Product Make-up

• Fine-wire strand made of bare copper wires
• PVC core insulation
• Cores twisted in layers
• PVC inner sheath, grey
• Tinned-copper braiding
• PVC outer sheath, high oil-resistance, grey (similar to RAL 7001)