PreviousPower Supply Eco 1-phase 24...

NextPower Supply Eco 1-phase 24...

Power Supply Eco 1-phase 24VDC 10A

Name: Power Supply Eco 1-phase 24VDC 10A
SKU: WAGO-787-732
Price: 611.00 NZD
Availability: InStock

Power supply; Eco; 1-phase; 24 VDC output voltage; 10 A output current; DC-OK LED; 4,00 mm²

$611.00 (Each excl GST)

(Each excl GST)

On Request

SKU: WAGO-787-732 Manufacturer part number: 787-732 Manufacturer: WAGO Price breaks available:

Select or Type Quantity

SKU: WAGO-787-732 Manufacturer part number: 787-732 Manufacturer: WAGO Price breaks available:

Free shipping on Web orders over $100

Overview
Downloads
Ask A Specialist

Technical data

Input

Phases	1
Nominal input voltage Ui nom	1 x AC 110 … 240 V
Input voltage range	1 x AC 85 … 264 V; DC 90 … 373 V
Nominal mains frequency range	47 … 63 Hz; 0 Hz
Input current Ii	≤ 1.5 A (230 VAC); ≤ 3 A (115 VAC)
Discharge current	≤ 3.5 mA
Inrush current	≤ 30 A
Power factor	≥ 0.94 (230 VAC); ≥ 0.98 (115 VAC)
Power factor correction (PFC)	Active
Mains failure hold-up time	≥ 20 ms (230 VAC)

Output

Nominal output voltage Uo nom	DC 24 V (SELV)
Output voltage range	DC 22 … 28 V (adjustable class="responsive")
Default setting	DC 24 V
Nominal output current Io nom	10 A (24 VDC)
Nominal output power	240W
Deviation	≤ 1 %
Residual ripple	≤ 100 mV (peak-to-peak)
Overload behavior	Constant power (in overload range: 1.15 … 1.4 x Io nom); Shutdown and automatic restart in the event of a short circuit

Signaling and communication

Signaling	1 x LED DC OK (green) 1 x Overload LED (red)
Operation status indicator	Green LED (24 VDC OK) Red LED (overload)

Efficiency/power losses

Power loss Pl	≤ 37.5 W (230 VAC; Nominal load)
Power loss (max.) Pl (max.)	53 W (110 VAC / 24 VDC; 11 A)
Efficiency (typ.)	86 % (230 VAC)

Circuit protection

Internal fuse	F 5 A / 250 VAC
Required backup fusing	An external DC fuse is required for the DC input voltage.
Recommended backup fusing	Circuit breaker: 10 A, 16 A; Tripping characteristic: B or C

Safety and protection

Isolation voltage (pri.-sec.)	DC 4.242 kV
Isolation voltage (pri.-PE)	DC 2.2 kV
Isolation voltage (sec.-PE)	DC 0.7 kV
Protection class	I
Protection type	IP20
Note on protection type	Per EN 60529
Resistance to reverse feed	≤ DC 28 V
Overvoltage category	II
Pollution degree	2
Transient suppression (primary)	Varistor
Short-circuit-protected	Yes
Open-circuit-proof	Yes
Parallel operation	Yes
Series operation	Yes
MTBF	480,000 h (per IEC 61709)

SKU WAGO-787-732

GTIN 4045454908140

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Product Files

Type Name

Datasheet

WAGO-787-732-Datasheet

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.