PreviousCAN Gateway

NextConfiguration cable USB Len...

Compact Controller 100

WAGO Compact Controller 100 8DI 4DO 2AI 2AO 2NI1K/PT1K 1RS485 2 x ETHERNET SD

Free shipping on Web orders over $100

$876.00

(Each excl GST)

In Stock

SKU: WAGO-751-9301 Manufacturer part number: 751-9301 Manufacturer: WAGO

Qty:

Overview
Specifications
Contact Us

Technical data

Communication	Telecontrol protocols, requires an additional license Modbus (TCP, UDP) EtherCAT® Master EtherNet/IPTM Adapter (slave) EtherNet/IPTM Scanner Modbus® RTU RS-485 interface MQTT Telecontrol protocols (requires an additional license on the device)
ETHERNET protocols	DHCP DNS NTP FTP FTPS SNMP HTTP HTTPS SSH
Visualization	Web-Visu Web Visu
Operating system	Real-time Linux (with RT-Preempt patch)
CPU	Cortex A7; 650 MHz
Programming languages per IEC 61131-3	Instruction List (IL) Ladder Diagram (LD) Function Block Diagram (FBD) Continuous Function Chart (CFC) Structured Text (ST) Sequential Function Chart (SFC)
Programming environment	Node-RED CODESYS V3.5
Configuration options	WAGOupload WAGO Solution Builder CODESYS V3.5 ETHERNET Settings Web-Based Management
Baud rate (communication/fieldbus 1)	10/100 Mbit/s
Baud rate	ETHERNET: 10/100 Mbit/s
Transmission medium (communication/fieldbus)	ETHERNET: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Main memory (RAM)	512MB
Internal memory (flash)	4096MB
Non-volatile hardware memory	128Kbytes
Program memory	32 MB
Data memory	128 MB
Non-volatile software memory	128.Kbytes
Type of memory card	microSD up to 32 GB (all guaranteed properties only valid with WAGO's memory card)
Memory card slot	Push-push mechanism
Indicators	LED (SYS, RUN), red/green: Status of system; LED (USR) red/green: User programmable status (can be used via CODESYS library); LED (SD) orange: Status of µSD; LED (LNK/ACT) green: Network connection via ports 1 … 2; LED (DI1 … 8) green: Status of inputs; LED (DO1 … 4) green: Status of outputs
Controls	Operating mode switch (RUN, STOP, RESET); reset button
Supply voltage (system)	24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (system) max.	500mA
Supply voltage (field)	24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (field) max.	2,000mA
Isolation	1250 V (DC 1 min., between system and field level)
Number of digital inputs	8
Input characteristic	Type 3 (per EN 61131-2)
Number of digital outputs	4
Output current (per channel)	500 mA (DC)
Output current	Short-circuit-protected
Signal type	Voltage Resistance measurement
Signal type (voltage)	0 … 10 VDC
Number of analog inputs	2
Resolution of analog inputs	16bits
Number of analog outputs	2
Resolution of analog outputs	12bits
Load impedance (voltage output)	≥ 5 kΩ
Number of measurement inputs	2
Temperature range	−60 °C … 350 °C, PT1000, Ni1000

SKU WAGO-751-9301

GTIN 4066966192865

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Locally Stocked in Australia	Only Show Stocked Items
Locally Stocked in NZ	Only Show Stocked Items

Your name *

Your email *

Enquiry *

Technical data

Communication	Telecontrol protocols, requires an additional license Modbus (TCP, UDP) EtherCAT® Master EtherNet/IPTM Adapter (slave) EtherNet/IPTM Scanner Modbus® RTU RS-485 interface MQTT Telecontrol protocols (requires an additional license on the device)
ETHERNET protocols	DHCP DNS NTP FTP FTPS SNMP HTTP HTTPS SSH
Visualization	Web-Visu Web Visu
Operating system	Real-time Linux (with RT-Preempt patch)
CPU	Cortex A7; 650 MHz
Programming languages per IEC 61131-3	Instruction List (IL) Ladder Diagram (LD) Function Block Diagram (FBD) Continuous Function Chart (CFC) Structured Text (ST) Sequential Function Chart (SFC)
Programming environment	Node-RED CODESYS V3.5
Configuration options	WAGOupload WAGO Solution Builder CODESYS V3.5 ETHERNET Settings Web-Based Management
Baud rate (communication/fieldbus 1)	10/100 Mbit/s
Baud rate	ETHERNET: 10/100 Mbit/s
Transmission medium (communication/fieldbus)	ETHERNET: Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Main memory (RAM)	512MB
Internal memory (flash)	4096MB
Non-volatile hardware memory	128Kbytes
Program memory	32 MB
Data memory	128 MB
Non-volatile software memory	128.Kbytes
Type of memory card	microSD up to 32 GB (all guaranteed properties only valid with WAGO's memory card)
Memory card slot	Push-push mechanism
Indicators	LED (SYS, RUN), red/green: Status of system; LED (USR) red/green: User programmable status (can be used via CODESYS library); LED (SD) orange: Status of µSD; LED (LNK/ACT) green: Network connection via ports 1 … 2; LED (DI1 … 8) green: Status of inputs; LED (DO1 … 4) green: Status of outputs
Controls	Operating mode switch (RUN, STOP, RESET); reset button
Supply voltage (system)	24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (system) max.	500mA
Supply voltage (field)	24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Current consumption (field) max.	2,000mA
Isolation	1250 V (DC 1 min., between system and field level)
Number of digital inputs	8
Input characteristic	Type 3 (per EN 61131-2)
Number of digital outputs	4
Output current (per channel)	500 mA (DC)
Output current	Short-circuit-protected
Signal type	Voltage Resistance measurement
Signal type (voltage)	0 … 10 VDC
Number of analog inputs	2
Resolution of analog inputs	16bits
Number of analog outputs	2
Resolution of analog outputs	12bits
Load impedance (voltage output)	≥ 5 kΩ
Number of measurement inputs	2
Temperature range	−60 °C … 350 °C, PT1000, Ni1000

SKU WAGO-751-9301

GTIN 4066966192865

Products specifications

Attribute name	Attribute value
Locally Stocked in Australia	Only Show Stocked Items
Locally Stocked in NZ	Only Show Stocked Items

Customers who bought this item also bought

EMC Clear Flex 4G2.5

ÖLFLEX® CLASSIC 100 CY Screened EMC-optimised, Clear PVC sheath 4G2.5 (3 + E) LAPP-00350173

$14.10

(Per/m excl GST)

In Stock

Add to cart