PreviousNBN3-F31K-E8-K

NextNCN3-F31K2M-N4-B23-S

NBN4-F25-2Z4L-V1

Double sensor, PBT, Type: 2x 2-wire, Installation: flush mountable, Voltage: DC, M12 , 4-pin, IP67

Free shipping on Web orders over $100

$313.00

(Each excl GST)

On Request

Quantity Breaks

25+

$313.00

SKU: PF-264861 Manufacturer part number: 264861

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NBN4-F25-2Z4L-V1

General specifications
Switching function		2 x normally open (NO)
Output type		Two-wire with minimum off-state current
Rated operating distance		4 mm
Installation		flush mountable
Output polarity		DC
Assured operating distance		0 ... 3.24 mm
Actual operating distance		3.6 ... 4.4 mm typ.
Reduction factor r_Al		0.6
Reduction factor r_Cu		0.45
Reduction factor r₃₀₄		1
Reduction factor r_St37		1.2
Output type		2x 2-wire
Nominal ratings
Operating voltage		5 ... 30 V DC
Switching frequency		0 ... 500 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 4.5 V
Operating current		4 ... 100 mA
Off-state current		120 ... 200 µA typ. 175 µA at 25 °C
Time delay before availability		≤ 100 ms
Switching state indicator		LED, yellow
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin
Connector housing		metal
Housing material		PBT
Sensing face		PC
Degree of protection		IP67
Mass		49 g
Tightening torque, fastening screws		M5 x 25 : 2.7 Nm
Note		Mounted on mechanical drive

SKU

PF-264861

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	4mm
Output	DC NO

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product Files

Type Name

Datasheet

264861_eng

Technical data of NBN4-F25-2Z4L-V1

General specifications
Switching function		2 x normally open (NO)
Output type		Two-wire with minimum off-state current
Rated operating distance		4 mm
Installation		flush mountable
Output polarity		DC
Assured operating distance		0 ... 3.24 mm
Actual operating distance		3.6 ... 4.4 mm typ.
Reduction factor r_Al		0.6
Reduction factor r_Cu		0.45
Reduction factor r₃₀₄		1
Reduction factor r_St37		1.2
Output type		2x 2-wire
Nominal ratings
Operating voltage		5 ... 30 V DC
Switching frequency		0 ... 500 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 4.5 V
Operating current		4 ... 100 mA
Off-state current		120 ... 200 µA typ. 175 µA at 25 °C
Time delay before availability		≤ 100 ms
Switching state indicator		LED, yellow
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin
Connector housing		metal
Housing material		PBT
Sensing face		PC
Degree of protection		IP67
Mass		49 g
Tightening torque, fastening screws		M5 x 25 : 2.7 Nm
Note		Mounted on mechanical drive

SKU

PF-264861

Products specifications

Attribute name	Attribute value
Operating Distance	4mm
Output	DC NO