PreviousNBN40-U1L-A2

NextNBN40-U1L-UU

NBN40-U1L-A2-M

VariKont ®, PA/metal, Type: 4-wire, non-flush, Voltage: DC, screw terminals, IP68 / IP69K

Free shipping on Web orders over $100

$350.00

(Each excl GST)

Global Stock

Quantity Breaks

25+

$350.00

SKU: PF-214115 Manufacturer part number: 214115

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NBN40-U1L-A2-M

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		40 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		0 ... 32.4 mm
Actual operating distance		36 ... 44 mm
Reduction factor r_Al		0.39
Reduction factor r_Cu		0.37
Reduction factor r₃₀₄		0.75
Reduction factor r_Brass		0.45
Output type		4-wire
Nominal ratings
Operating voltage		10 ... 60 V DC
Switching frequency		0 ... 100 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 2 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA typ. 0.01 mA
No-load supply current		≤ 20 mA
Time delay before availability		120 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		1030 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
Protection class		II
	Rated insulation voltage	230 V
	Rated impulse withstand voltage	2.5 kV
UL approval		cULus Listed, General Purpose
E1 Type approval		10R-047189
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA/metal
Sensing face		PA
Housing base		plastic
Degree of protection		IP68 / IP69K
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing)

SKU

PF-214115

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	40mm
Output	PNP NO/NC

Your name *

Your email *

Enquiry *

Product Files

Type Name File Name / Description

Datasheet

214115_eng

Technical data of NBN40-U1L-A2-M

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		40 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		0 ... 32.4 mm
Actual operating distance		36 ... 44 mm
Reduction factor r_Al		0.39
Reduction factor r_Cu		0.37
Reduction factor r₃₀₄		0.75
Reduction factor r_Brass		0.45
Output type		4-wire
Nominal ratings
Operating voltage		10 ... 60 V DC
Switching frequency		0 ... 100 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 2 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA typ. 0.01 mA
No-load supply current		≤ 20 mA
Time delay before availability		120 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		1030 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
Protection class		II
	Rated insulation voltage	230 V
	Rated impulse withstand voltage	2.5 kV
UL approval		cULus Listed, General Purpose
E1 Type approval		10R-047189
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA/metal
Sensing face		PA
Housing base		plastic
Degree of protection		IP68 / IP69K
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing)

SKU

PF-214115

Products specifications

Attribute name	Attribute value
Operating Distance	40mm
Output	PNP NO/NC