PreviousNBN40-U1L-A2-M

NextNBN40-U1L-Z2

NBN40-U1L-UU

VariKont ®, PA 6.6 / metal, Type: 2-wire, non-flush, Operating voltage: 20 ... 300 V DC / 20 ... 253 V AC

Free shipping on Web orders over $100

$554.00

(Each excl GST)

Global Stock

Quantity Breaks

25+

$554.00

SKU: PF-246527 Manufacturer part number: 246527

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NBN40-U1L-UU

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		40 mm
Installation		non-flush
Output polarity		AC/DC
Assured operating distance		0 ... 32.4 mm
Actual operating distance		36 ... 44 mm typ. 40 mm
Reduction factor r_Al		0.37
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.73
Reduction factor r_Fe		1
Reduction factor r_Brass		0.4
Output type		2-wire
Nominal ratings
Switching frequency		0 ... 25 Hz
Hysteresis		1 ... 10 typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Short-circuit protection		pulsing
Voltage drop		≤ 5 V (typ. 2V) DC operation ≤ 8 V (typ. 2V) AC operation
Momentary current (20 ms, 0.1 Hz)		0 ... 3000 mA
Operating current		5 ... 500 mA
Off-state current		≤ 1.5 mA
Time delay before availability		≤ 300 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Error indicator		flashes when overcurrent
Electrical specifications
Rated operating voltage		24 ... 250 V DC / 24 ... 230 V AC
Operating voltage		20 ... 300 V DC / 20 ... 253 V AC
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
Protection class		II
	Rated insulation voltage	230 V
	Rated impulse withstand voltage	2.5 kV
UL approval		cULus Listed, General Purpose "For use in NFPA 79 Applications only" For overcurrent protection, install a fuse with a rated current of max. 3 A and at least 300 V AC/DC
CCC approval		Ue 75VDC - 250VDC Ue 75VAC - 230VAC
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		terminal compartment
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA 6.6 / metal
Sensing face		PA 6.6
Housing base		plastic
Degree of protection		IP67

SKU

PF-246527

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	40mm
Output	NAMUR NC

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product Files

Type Name

Datasheet

246527_eng

Technical data of NBN40-U1L-UU

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		40 mm
Installation		non-flush
Output polarity		AC/DC
Assured operating distance		0 ... 32.4 mm
Actual operating distance		36 ... 44 mm typ. 40 mm
Reduction factor r_Al		0.37
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.73
Reduction factor r_Fe		1
Reduction factor r_Brass		0.4
Output type		2-wire
Nominal ratings
Switching frequency		0 ... 25 Hz
Hysteresis		1 ... 10 typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Short-circuit protection		pulsing
Voltage drop		≤ 5 V (typ. 2V) DC operation ≤ 8 V (typ. 2V) AC operation
Momentary current (20 ms, 0.1 Hz)		0 ... 3000 mA
Operating current		5 ... 500 mA
Off-state current		≤ 1.5 mA
Time delay before availability		≤ 300 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Error indicator		flashes when overcurrent
Electrical specifications
Rated operating voltage		24 ... 250 V DC / 24 ... 230 V AC
Operating voltage		20 ... 300 V DC / 20 ... 253 V AC
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
Protection class		II
	Rated insulation voltage	230 V
	Rated impulse withstand voltage	2.5 kV
UL approval		cULus Listed, General Purpose "For use in NFPA 79 Applications only" For overcurrent protection, install a fuse with a rated current of max. 3 A and at least 300 V AC/DC
CCC approval		Ue 75VDC - 250VDC Ue 75VAC - 230VAC
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		terminal compartment
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA 6.6 / metal
Sensing face		PA 6.6
Housing base		plastic
Degree of protection		IP67

SKU

PF-246527

Products specifications

Attribute name	Attribute value
Operating Distance	40mm
Output	NAMUR NC