PreviousNBN40-U1L-Z2
NextNBN50-U1K-E2

NBN50-U1K-A2

VariKont ®, PA, Type: 4-wire, Installation: non-flush, Voltage: DC, screw terminals, IP68 / IP69

$437.00

(Each excl GST)
On Request
Select or Type Quantity
SKU: PF-316607-0006 Manufacturer part number: 316607-0006 Price breaks available:

Free shipping on Web orders over $100

Technical data of  NBN50-U1K-A2

General specifications
Switching function complementary
Output type PNP
Rated operating distance 50 mm
Installation non-flush
Output polarity DC
Assured operating distance 0 ... 40.5 mm
Actual operating distance 45 ... 55 mm typ.
Reduction factor rAl 0.5
Reduction factor rCu 0.49
Reduction factor r304 0.78
Reduction factor rBrass 0.55
Output type 4-wire
Nominal ratings
Operating voltage 10 ... 30 V DC
Switching frequency 0 ... 40 Hz
Hysteresis typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop ≤ 2 V
Operating current 0 ... 200 mA
Off-state current 0 ... 0.5 mA
No-load supply current ≤ 20 mA
Time delay before availability 80 ms
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 929 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-section up to 2.5 mm2
Minimum core cross-section without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material PA
Sensing face PA
Housing base plastic
Degree of protection IP68 / IP69
Mass 225 g
Note Tightening torque: 1.8 Nm (housing)
 
SKU
PF-316607-0006
We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.
Products specifications
Attribute name Attribute value
Operating Distance 50mm
Output PNP NO/NC
Product Files
Type Name
Datasheet
316607-0006_eng
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Technical data of  NBN50-U1K-A2

General specifications
Switching function complementary
Output type PNP
Rated operating distance 50 mm
Installation non-flush
Output polarity DC
Assured operating distance 0 ... 40.5 mm
Actual operating distance 45 ... 55 mm typ.
Reduction factor rAl 0.5
Reduction factor rCu 0.49
Reduction factor r304 0.78
Reduction factor rBrass 0.55
Output type 4-wire
Nominal ratings
Operating voltage 10 ... 30 V DC
Switching frequency 0 ... 40 Hz
Hysteresis typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop ≤ 2 V
Operating current 0 ... 200 mA
Off-state current 0 ... 0.5 mA
No-load supply current ≤ 20 mA
Time delay before availability 80 ms
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 929 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-section up to 2.5 mm2
Minimum core cross-section without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material PA
Sensing face PA
Housing base plastic
Degree of protection IP68 / IP69
Mass 225 g
Note Tightening torque: 1.8 Nm (housing)
 
SKU
PF-316607-0006
Products specifications
Attribute name Attribute value
Operating Distance 50mm
Output PNP NO/NC
Categories
Brands
Contact Info
0800 849 2211

Mon-Fri 8:00am - 5:00pm

[email protected]
7-19 Ruffell Road, Hamilton‎

New Zealand

Information
Customer Service
Copyright © 2026 ECS Express Store. All rights reserved.