PreviousNBN40-U1L-UU

NextNBN50-U1K-A2

NBN40-U1L-Z2

VariKont ®, PA, Type: 2-wire, Installation: non-flush, Voltage: DC, screw terminals, IP68 / IP69K

Free shipping on Web orders over $100

$269.00

(Each excl GST)

Global Stock

Quantity Breaks

25+

$269.00

SKU: PF-233001 Manufacturer part number: 233001

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NBN40-U1L-Z2

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		40 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		0 ... 32.4 mm
Actual operating distance		36 ... 44 mm typ. 40 mm
Reduction factor r_Al		0.39
Reduction factor r_Cu		0.37
Reduction factor r₃₀₄		0.76
Output type		2-wire
Nominal ratings
Operating voltage		5 ... 60 V DC
Switching frequency		0 ... 100 Hz
Hysteresis		1 ... 10 typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Short-circuit protection		pulsing
Voltage drop		≤ 5 V
Voltage drop at I_L
	Voltage drop I_L = 100mA, switching element on	... 5 V
Rated insulation voltage		60 V
Operating current		2 ... 200 mA
Off-state current		0 ... 1 mA typ. 0.7 mA
Switching state indicator		2 LED, yellow
Functional safety related parameters
MTTF_d		1170 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
Protection class		II
	Rated insulation voltage	60 V
	Rated impulse withstand voltage	800 V
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA
Sensing face		PA
Housing base		plastic
Degree of protection		IP68 / IP69K
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing)

SKU

PF-233001

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	40mm
Output	DC NO or NC

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product Files

Type Name

Datasheet

233001_eng

Technical data of NBN40-U1L-Z2

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		40 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		0 ... 32.4 mm
Actual operating distance		36 ... 44 mm typ. 40 mm
Reduction factor r_Al		0.39
Reduction factor r_Cu		0.37
Reduction factor r₃₀₄		0.76
Output type		2-wire
Nominal ratings
Operating voltage		5 ... 60 V DC
Switching frequency		0 ... 100 Hz
Hysteresis		1 ... 10 typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Short-circuit protection		pulsing
Voltage drop		≤ 5 V
Voltage drop at I_L
	Voltage drop I_L = 100mA, switching element on	... 5 V
Rated insulation voltage		60 V
Operating current		2 ... 200 mA
Off-state current		0 ... 1 mA typ. 0.7 mA
Switching state indicator		2 LED, yellow
Functional safety related parameters
MTTF_d		1170 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
Protection class		II
	Rated insulation voltage	60 V
	Rated impulse withstand voltage	800 V
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PA
Sensing face		PA
Housing base		plastic
Degree of protection		IP68 / IP69K
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing)

SKU

PF-233001

Products specifications

Attribute name	Attribute value
Operating Distance	40mm
Output	DC NO or NC