PreviousNRN75-FP-A2-P3-V1

NextNCB40-FP-W-P1

NCB40-FP-A2-P1

Rectangular type, PBT, Type: 4-wire, Installation: flush, Voltage: DC, screw terminals, IP68

Free shipping on Web orders over $100

$482.00

(Each excl GST)

On Request

Quantity Breaks

25+

$482.00

SKU: PF-187486 Manufacturer part number: 187486

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NCB40-FP-A2-P1

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		40 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 32.4 mm
Reduction factor r_Al		0.25
Reduction factor r_Cu		0.23
Reduction factor r₃₀₄		0.85
Output type		4-wire
Nominal ratings
Operating voltage		10 ... 60 V
Switching frequency		0 ... 80 Hz
Hysteresis		typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA
No-load supply current		≤ 20 mA
Time delay before availability		≤ 300 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		630 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Housing base		PBT
Degree of protection		IP68

SKU

PF-187486

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	40mm
Output	PNP NO/NC

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product Files

Type Name

Datasheet

187486_eng

Technical data of NCB40-FP-A2-P1

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		40 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 32.4 mm
Reduction factor r_Al		0.25
Reduction factor r_Cu		0.23
Reduction factor r₃₀₄		0.85
Output type		4-wire
Nominal ratings
Operating voltage		10 ... 60 V
Switching frequency		0 ... 80 Hz
Hysteresis		typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA
No-load supply current		≤ 20 mA
Time delay before availability		≤ 300 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		630 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Housing base		PBT
Degree of protection		IP68

SKU

PF-187486

Products specifications

Attribute name	Attribute value
Operating Distance	40mm
Output	PNP NO/NC