PreviousNJ15+U1+DW1-100

NextNJ40+U1+E

NJ20P+U1+A2

VariKont ®, PBT, Type: 4-wire, Installation: non-flush, Voltage: DC, terminal compartment, IP68

Free shipping on Web orders over $100

$357.00

(Each excl GST)

On Request

Quantity Breaks

25+

$357.00

SKU: PF-016259 Manufacturer part number: 016259

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NJ20P+U1+A2

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		20 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		1 ... 16.2 mm
Reduction factor r_Al		1
Reduction factor r_Cu		1
Reduction factor r_St37		0
Reduction factor r_Brass		1 (Minimum distance: 2 mm)
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 200 Hz
Hysteresis		1 ... 10 typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
No-load supply current		≤ 20 mA
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		terminal compartment
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Degree of protection		IP68

SKU

PF-016259

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	20mm
Output	PNP NO/NC

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product Files

Type Name

Datasheet

016259_eng

Technical data of NJ20P+U1+A2

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		20 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		1 ... 16.2 mm
Reduction factor r_Al		1
Reduction factor r_Cu		1
Reduction factor r_St37		0
Reduction factor r_Brass		1 (Minimum distance: 2 mm)
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 200 Hz
Hysteresis		1 ... 10 typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
No-load supply current		≤ 20 mA
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		terminal compartment
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Degree of protection		IP68

SKU

PF-016259

Products specifications

Attribute name	Attribute value
Operating Distance	20mm
Output	PNP NO/NC