NRB20-L3-E2-IO-V1

Name: NRB20-L3-E2-IO-V1
SKU: PF-306534-0003
Price: 403.00 NZD
Availability: InStock

VariKont L ®, GD-ZnAl4Cu1, coated, Type: 3-wire, Installation: flush, Voltage: DC, M12 , 4-pin, IP67

$403.00 (Each excl GST)

(Each excl GST)

On Request

SKU: PF-306534-0003 Manufacturer part number: 306534-0003 Price breaks available:

Select or Type Quantity

SKU: PF-306534-0003 Manufacturer part number: 306534-0003 Price breaks available:

Free shipping on Web orders over $100

Overview
Specifications
Downloads
Ask A Specialist

Technical data of NRB20-L3-E2-IO-V1

General specifications
Switching function		Normally open/closed (NO/NC) programmable
Output type		PNP
Rated operating distance		20 mm (factory setting)
Near operating distance		15 mm (can be activated by software)
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 16.2 mm
Reduction factor r_Al		1
Reduction factor r_Cu		1
Reduction factor r₃₀₄		1
Reduction factor r_St37		1
Output type		3-wire
Nominal ratings
Operating voltage		10 ... 30 V DC
Switching frequency		0 ... 440 Hz (switch point mode) 0 ... 10 Hz (window mode, switch point mode with stability alarm)
Hysteresis		typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 0.5 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA typ. 60 µA at 25 °C
No-load supply current		≤ 20 mA
Time delay before availability		max. 150 ms
Constant magnetic field		200 mT
Alternating magnetic field		200 mT
Operating voltage indicator		LED, green
Status indicator		LED, yellow
Functional safety related parameters
MTTF_d		701 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Interface
Interface type		IO-Link ( via C/Q = pin 4 )
Transfer rate		COM 2 (38.4 kBaud)
IO-Link Revision		1.1
Min. cycle time		2.3 ms
Process data width		Process data input (control system side): 2 Bit Process data output (control system side): none
SIO mode support		yes
Device ID		0x201001 (2101249)
Compatible master port type		A
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
Protection class		II
	Rated insulation voltage	60 V
	Rated impulse withstand voltage	800 V
UL approval		cULus Listed, General Purpose Class 2 power source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin
Housing material		GD-ZnAl4Cu1, coated mounting flange PA6-GF35
Sensing face		PA 6 Grivory GVN-35H
Degree of protection		IP67
Mass		205 g
Factory settings
Default setting		operating mode = switch point mode with stability alarm switching function = Normally open (NO) switching distance = 20 mm

SKU

PF-306534-0003

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	20mm
Output	PNP NO

Product Files

Type Name

Datasheet

306534-0003_eng

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Technical data of NRB20-L3-E2-IO-V1

General specifications
Switching function		Normally open/closed (NO/NC) programmable
Output type		PNP
Rated operating distance		20 mm (factory setting)
Near operating distance		15 mm (can be activated by software)
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 16.2 mm
Reduction factor r_Al		1
Reduction factor r_Cu		1
Reduction factor r₃₀₄		1
Reduction factor r_St37		1
Output type		3-wire
Nominal ratings
Operating voltage		10 ... 30 V DC
Switching frequency		0 ... 440 Hz (switch point mode) 0 ... 10 Hz (window mode, switch point mode with stability alarm)
Hysteresis		typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 0.5 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA typ. 60 µA at 25 °C
No-load supply current		≤ 20 mA
Time delay before availability		max. 150 ms
Constant magnetic field		200 mT
Alternating magnetic field		200 mT
Operating voltage indicator		LED, green
Status indicator		LED, yellow
Functional safety related parameters
MTTF_d		701 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Interface
Interface type		IO-Link ( via C/Q = pin 4 )
Transfer rate		COM 2 (38.4 kBaud)
IO-Link Revision		1.1
Min. cycle time		2.3 ms
Process data width		Process data input (control system side): 2 Bit Process data output (control system side): none
SIO mode support		yes
Device ID		0x201001 (2101249)
Compatible master port type		A
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
Protection class		II
	Rated insulation voltage	60 V
	Rated impulse withstand voltage	800 V
UL approval		cULus Listed, General Purpose Class 2 power source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin
Housing material		GD-ZnAl4Cu1, coated mounting flange PA6-GF35
Sensing face		PA 6 Grivory GVN-35H
Degree of protection		IP67
Mass		205 g
Factory settings
Default setting		operating mode = switch point mode with stability alarm switching function = Normally open (NO) switching distance = 20 mm