NCN50-FP-W-P1

Name: NCN50-FP-W-P1
SKU: PF-130546
Price: 1429.00 NZD
Availability: InStock

Rectangular type, PBT, Type: 2-wire, Installation: non-flush, Voltage: AC, screw terminals, IP68

$1429.00 (Each excl GST)

(Each excl GST)

Global Stock

SKU: PF-130546 Manufacturer part number: 130546 Price breaks available:

Select or Type Quantity

SKU: PF-130546 Manufacturer part number: 130546 Price breaks available:

Free shipping on Web orders over $100

Overview
Specifications
Downloads
Ask A Specialist

Technical data of NCN50-FP-W-P1

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		50 mm
Installation		non-flush
Output polarity		AC
Assured operating distance		0 ... 40.5 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.85
Output type		2-wire
Nominal ratings
Operating voltage		20 ... 253 V AC
Switching frequency		0 ... 20 Hz
Hysteresis		typ. 3 %
Short-circuit protection		no
Voltage drop		≤ 5 V typ. 4V
Momentary current (20 ms, 0.1 Hz)		max. 4000 mA
Operating current		5 ... 500 mA
Off-state current		0.3 ... 1 mA typ. 0.7 mA
Time delay before availability		≤ 100 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		screw terminals
Core cross-section		up to 2.5 mm²
Housing material		PBT
Sensing face		PBT
Housing base		PBT
Degree of protection		IP68
Note		¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80...253 V Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.

SKU

PF-130546

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	50mm

Product Files

Type Name

Datasheet

130546_eng

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Technical data of NCN50-FP-W-P1

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		50 mm
Installation		non-flush
Output polarity		AC
Assured operating distance		0 ... 40.5 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.85
Output type		2-wire
Nominal ratings
Operating voltage		20 ... 253 V AC
Switching frequency		0 ... 20 Hz
Hysteresis		typ. 3 %
Short-circuit protection		no
Voltage drop		≤ 5 V typ. 4V
Momentary current (20 ms, 0.1 Hz)		max. 4000 mA
Operating current		5 ... 500 mA
Off-state current		0.3 ... 1 mA typ. 0.7 mA
Time delay before availability		≤ 100 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		screw terminals
Core cross-section		up to 2.5 mm²
Housing material		PBT
Sensing face		PBT
Housing base		PBT
Degree of protection		IP68
Note		¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80...253 V Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.