PreviousNJ15-M1K-A2

NextNJ15-M1-E2-V1

NJ15-M1K-N

VariKont M ®, PBT, Type: 2-wire, Installation: non-flush, Voltage: DC, screw terminals, IP67

Free shipping on Web orders over $100

$316.00

(Each excl GST)

On Request

Quantity Breaks

25+

$316.00

SKU: PF-306793 Manufacturer part number: 306793

Qty:

Overview
Specifications
Contact Us
Downloads

Technical data of NJ15-M1K-N

General specifications
Switching function		Normally closed (NC)
Output type		NAMUR
Rated operating distance		15 mm
Installation		non-flush
Assured operating distance		0 ... 12.15 mm
Actual operating distance		13.5 ... 16.5 mm typ.
Reduction factor r_Al		0.45
Reduction factor r_Cu		0.4
Reduction factor r₃₀₄		0.8
Output type		2-wire
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 kΩ)
Switching frequency		0 ... 100 Hz
Current consumption
	Measuring plate not detected	min. 3 mA
	Measuring plate detected	≤ 1 mA
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		2424 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
	Electromagnetic compatibility	NE 21:2012
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
IECEx approval
	Equipment protection level Ga	IECEx PTB 11.0021X
	Equipment protection level Gb	IECEx PTB 11.0021X
	Equipment protection level Da	IECEx PTB 11.0021X
	Equipment protection level Mb	IECEx PTB 11.0021X
ATEX approval
	Equipment protection level Ga	PTB 00 ATEX 2032 X
	Equipment protection level Gb	PTB 00 ATEX 2032 X
	Equipment protection level Da	PTB 00 ATEX 2032 X
UL approval
	Ordinary Location	E87056
	Hazardous Location	E501628
	Control drawing	116-0451
CCC approval
	Hazardous Location	2020322315002302
NEPSI approval
	NEPSI certificate	GYJ16.1394X
Ambient conditions
Ambient temperature		-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Degree of protection		IP67
General information
Use in the hazardous area		see instruction manuals

SKU

PF-306793

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Operating Distance	15mm
Output	NAMUR NC

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product Files

Type Name

Datasheet

306793_eng

Technical data of NJ15-M1K-N

General specifications
Switching function		Normally closed (NC)
Output type		NAMUR
Rated operating distance		15 mm
Installation		non-flush
Assured operating distance		0 ... 12.15 mm
Actual operating distance		13.5 ... 16.5 mm typ.
Reduction factor r_Al		0.45
Reduction factor r_Cu		0.4
Reduction factor r₃₀₄		0.8
Output type		2-wire
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 kΩ)
Switching frequency		0 ... 100 Hz
Current consumption
	Measuring plate not detected	min. 3 mA
	Measuring plate detected	≤ 1 mA
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		2424 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
	Electromagnetic compatibility	NE 21:2012
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
IECEx approval
	Equipment protection level Ga	IECEx PTB 11.0021X
	Equipment protection level Gb	IECEx PTB 11.0021X
	Equipment protection level Da	IECEx PTB 11.0021X
	Equipment protection level Mb	IECEx PTB 11.0021X
ATEX approval
	Equipment protection level Ga	PTB 00 ATEX 2032 X
	Equipment protection level Gb	PTB 00 ATEX 2032 X
	Equipment protection level Da	PTB 00 ATEX 2032 X
UL approval
	Ordinary Location	E87056
	Hazardous Location	E501628
	Control drawing	116-0451
CCC approval
	Hazardous Location	2020322315002302
NEPSI approval
	NEPSI certificate	GYJ16.1394X
Ambient conditions
Ambient temperature		-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Degree of protection		IP67
General information
Use in the hazardous area		see instruction manuals

SKU

PF-306793

Products specifications

Attribute name	Attribute value
Operating Distance	15mm
Output	NAMUR NC