NJ2-12GM50-WO-V13

Name: NJ2-12GM50-WO-V13
SKU: PF-026687
Price: 576.00 NZD
Availability: InStock

Stainless steel 303, Type: 2-wire, Installation: flush, Voltage: AC, M12 , 3-pin, IP67

$576.00 (Each excl GST)

(Each excl GST)

On Request

SKU: PF-026687 Manufacturer part number: 026687 Price breaks available:

Select or Type Quantity

SKU: PF-026687 Manufacturer part number: 026687 Price breaks available:

Free shipping on Web orders over $100

Overview
Specifications
Downloads
Ask A Specialist

Technical data of NJ2-12GM50-WO-V13

General specifications
Switching function		Normally closed (NC)
Output type		Two-wire
Rated operating distance		2 mm
Installation		flush
Output polarity		AC
Assured operating distance		0 ... 1.62 mm
Reduction factor r_Al		0.1
Reduction factor r_Cu		0.1
Reduction factor r₃₀₄		0.6
Output type		2-wire
Nominal ratings
Operating voltage		20 ... 253 V
Switching frequency		0 ... 20 Hz
Voltage drop		typ. 4 V at 15 ... 200 mA typ. 6.5 V at 5 mA
Momentary current (20 ms, 0.1 Hz)		0 ... 1200 mA
Operating current		5 ... 200 mA
Off-state current		typ. 0.7 mA
Time delay before availability		≤ 30 ms
Switching state indicator		LED, yellow
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 3-pin
Core cross-section		-
Housing material		Stainless steel 1.4305 / AISI 303
Sensing face		PBT
Degree of protection		IP67
Note		¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80...253 V Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.
General information
Scope of delivery		2 self locking nuts in scope of delivery

SKU

PF-026687

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.

Products specifications

Attribute name	Attribute value
Size	12mm
Output	AC NC
Connection Type	M12 Connector
Housing	Stainless Steel
Operating Distance	2mm

Product Files

Type Name

Datasheet

026687_eng

Your name *

Your email *

Enquiry *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Technical data of NJ2-12GM50-WO-V13

General specifications
Switching function		Normally closed (NC)
Output type		Two-wire
Rated operating distance		2 mm
Installation		flush
Output polarity		AC
Assured operating distance		0 ... 1.62 mm
Reduction factor r_Al		0.1
Reduction factor r_Cu		0.1
Reduction factor r₃₀₄		0.6
Output type		2-wire
Nominal ratings
Operating voltage		20 ... 253 V
Switching frequency		0 ... 20 Hz
Voltage drop		typ. 4 V at 15 ... 200 mA typ. 6.5 V at 5 mA
Momentary current (20 ms, 0.1 Hz)		0 ... 1200 mA
Operating current		5 ... 200 mA
Off-state current		typ. 0.7 mA
Time delay before availability		≤ 30 ms
Switching state indicator		LED, yellow
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 3-pin
Core cross-section		-
Housing material		Stainless steel 1.4305 / AISI 303
Sensing face		PBT
Degree of protection		IP67
Note		¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80...253 V Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.
General information
Scope of delivery		2 self locking nuts in scope of delivery